All ActivityMost RecentMost LikesSolutionsRe: How do you remove a rear lift bed?That would be a good way to do it as well, I just didn't want to mess with removing the shade covers and all those screws for the L bracket - but separating the bottom from the box wasn't too bad. It only took a few hours from removal to how you see it there. I haven't put it back in but looking forward to doing it soon. I made one mistake and didn't measure to make sure that each side was perfectly aligned and I noticed that after I finish it, that the left side panel is about 1/2" futher back than the right one.... so not sure If I have to relocate it to get it perfectly square...Re: How do you remove a rear lift bed?Here is a pic of it, it's flipped upside down, but you can see where I cut it and moved it to sit closer to the metal rails. hope to have it sitting around 80-80 inches from the floor Re: How do you remove a rear lift bed?Yes, I completed the modification, but have yet to put it back in since I need some extra man power to get it in place and the manpower to do it. I will try and add them on and post themRe: How do you remove a rear lift bed?I was able to get it out, and man, it IS heavy, even with 4 of us lifting, it took a bit to man handle it down and out. I completely rebuilt the box, I 1st removed the sides, and then the rear and front panel - cut 4" off the bottom of the sides, then remounted the "base" that the mattress sits on up 10" from it's original position. cut out the rear panel to match and mounted and screwed everything back together... it looks great - just waiting on my buddies to come back so I can lift it back up - all in all I'm hoping to get at least 10" higher than before and should now clear 80" from floor to bottom of the bed when in the up positionRe: How do you remove a rear lift bed?Even if my Teryx had no wheels, it wouldn't fit, and I've done the cage chop on my old rhino... I rather solve the problem then change everything I have. I don't see anything that it's bolted to, just has 2 roller wheels on the back side and the 4 gas struts that keep it in place - I'm fairly sure I can get it out as long as I can get the rear rollers out of their guide... I will give it a shot tomorrowHow do you remove a rear lift bed?Looking to pull out the rear lift bed on my 2002 Weekend warrior FS2600. I need to remove it so I can modify th box and make it sit higher so I can clear the roof on my 2014 Teryx4 . looking to raise it from the current 72" (floor to bottom of bed now) to at least 78" Should have plenty of room, I just never had to take the bed box out... any tips, tricks?? It has 4 gas lift struts...
GroupsFifth Wheel Group Interested in fifth wheels? You've come to the right spot.Jan 24, 202519,006 Posts