All ActivityMost RecentMost LikesSolutionsRe: RM2652 Burner Will Not Stay LitI measured the voltage with the thermocouple out also. I believe for the RM2652 you have a 2-wire thermocouple. Mine is a solid piece that screws directly into the safety valve.Re: RM2652 Burner Will Not Stay LitHow did you determine your thermocouple was the problem when it tested good? I ask because I'm going through the same situation with a Dometic RM2353 with the exception that my fridge shuts off randomly - could be an hour, a day, etc. I pulled my thermocouple and it tested at about 27-28mV as well.Re: Towing with Lance TC:I had an LC480 up until a couple of years ago. Yes, there was a flange welded to the camper bumper. The receiver hitch extension bolted up to it. I'm in California, the truck license plate was moved to the camper - no requirement for a separate plate for the camper. I pulled a friend's ski boat a couple times, no problems.Re: Location of jack 2002 jeep wranglerI have a 2002 Wrangler. The jack is under the passenger seat.Re: Northstar 650SC ownersWe have a TC650 on a 2003 Dodge 2500 S/B with no air bags. It's level. I added a sway bar. Re: Reico Titan Swing out jack bracket helpHi. I don't think it matters for up or down orientation since they can swing both in and out. If I recall, they rotate into position and lock in to the notches that keep them in position. Sorry I don't have any more info.Re: Reico Titan Swing out jack bracket helpI attached the fat side of the bracket to the jack, and the thinner side to the existing support on the camper. The jack should be able to swing both outward and inward. These are the only pictures i have - I sold the truck and camper last year.
GroupsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Feb 06, 202544,025 Posts