All ActivityMost RecentMost LikesSolutionsRe: Onan Gen Shuts Off NAUTIQUE wrote: Following this thread! My Onan Emerald Plus 4000 in my 2000 rig is super finicky! Had it worked on last year when it wouldn't start and they got it running pretty good. But it still seems to have a problem running my AC when it's real hot out. It'll run for awhile, AC will cool the rig down to set temp, but eventually it'll die when the AC goes to kick back on again. FRUSTRATING! Mine has run dry well. Only time I ever had issues, 2 AC and a Microwave at same time... Other than that, until now, been very reliable for 400+ hoursRe: Aftermarket Cruise Control 02 Bounder Ford F-53 PursuitInsight wrote: ebrake or parking brake has a sensor on the ebrake pedal. it brakes separatly a drum and pads on the tranmission end. not related the the real brakes or cc the one on the master is connected to the cc. as a second secure cancel way for the cc your ebrake issue is possibly just a sensor adjustment or the pedal spring not bringing the pedal back enough. pull on it to see Thanks, that helps me understand. I will try the "pull" when I get home, just to end the light being on. I may need to see if the sensor on the Master is bad. Ideas how to test? I thought by disconnecting the wires, and observing as either OPEN or Shorted, the cruise ON light might work. It did not. So, probably not the sensor?Re: Onan Gen Shuts OffAirtex E11020 up to $44 on Amazon :( Timing is everything...Mine is a bit slowRe: Onan Gen Shuts Off Ivylog wrote: I carry a spare fuel pump as it's a known problem area...Airtex E11020 $38 on Amazon. Check the picture to see if yours looks the same. Thanks, I will check it when I pull it out.Re: Onan Gen Shuts Off filadelfia wrote: You could go to the Onan manual or watch a u-tube video on line and learn how to retrieve a fault code. The locked in code should help identify the reason for the shutdown. Good luck Don Excellent idea. I started watching some YouTube videos, and will look for the codes. ThanksRe: Onan Gen Shuts OffAh, sage advise. Thanks, did not even think about the 2 going together. Although it does seem natural :)Re: Onan Gen Shuts OffGreat, thanks, I can get the S/N no worries. Today's projectRe: Onan Gen Shuts OffOK, where would I find a schematic/idea on changing? I imagine something in my Bounder package might have it, if not WWW?Re: Onan Gen Shuts OffOK, another great idea. See, I LOVE this place!!Re: Onan Gen Shuts OffOK, seems like a reasonable idea! Thanks, I will as soon as I get home.