Buckscent
Explorer
Joined 5 years ago
User Profile
User Widgets
All Activity
Re: Help: winegard pathway x1
Big Katuna wrote: If you have a voltmeter you can measure the voltage at the coax. If I remember it’s around 12 volts. Or try a different box and cable. What does the startup screen say? I have tried different coax and tv. When I turn on the receiver I get the “acquiring signal” this be no more then 5 min. After about 15 min of the same screen with no green bars going across the screen I get the... I forgot exact words but the one that says no signal found, check line of sight. Make sure nothing blocking view. I have moved the winegard to 2-3 different locations with wide open view of the SW sky.494Views0likes0CommentsHelp: winegard pathway x1
Had this setup for a few years and has always worked well. Now it will not find a signal. I have tried a different coax cable, other TV, so the only thing left is the receiver, which I can see the “acquiring signal” on the screen so I doubt it is the receiver. But the winegard itself doesn’t make the noise it use to. I remember when it was acquiring signal you could hear it making noise inside. Like it was moving around searching for signal. Now nothing, no noise at all. Any ideas?? Thanks all1.7KViews0likes6Comments
Groups
