All ActivityMost RecentMost LikesSolutionsRe: Any ideas for a light while grilling?My wife got me these little fingerless gloves with leds on them. Haven't used it yet but it puts light literally at your fingertips.Re: Upgraded tires - air pressure?I could not find a psi rating on the rims, but they say max load 2830 lbs which matches the E tires, they are 6 lug too.Re: Upgraded tires - air pressure? time2roll wrote: Did you get high pressure stems? Otherwise yes I would run them 75/80 psi. Would there be different stems for 65 or 80 psi?Re: Upgraded tires - air pressure?Thanks! I had bumped them up to 80 when I caught it, but was second guessing myself.Upgraded tires - air pressure?I had load range D tires on my trailer that require 65 psi. They are the right load range for the trailer, but I wanted 10 ply so when it was time to change the tires I changed to load range E which is 80 psi. The place I bought the tires from filled them to 65 psi (didn't notice until a few weeks later) but everything I am reading says always fill ST tires to the max. So should I fill the tires based on trailer weight or the tire?Any opinions on RecPro furniture?Anyone order a RecPro couch? Looking for feedback, I hate to spend this much money on a couch I can't sit on and see, but there are not a lot of RV couch options easily available. https://www.recpro.com/Re: Eternabond tape on roof laps over sealantgood input, thanks!Re: Delamination - not leak caused?Any other thoughts on this? I've looked and looked and can't find any water damage. I'm guessing this is a cosmetic issue only? Is this common?gutter and/or window seal?I'm looking at redoing the bead of caulk on top of the rail over the roof screws above the gutter along the sides. What sealant would you use? Dicor? I'm also looking at resealing around the windows. No leaks but the squeeze out from when they installed the windows is now crumbling and i'm thinking that running a bead around the windows would be a good idea.Re: Eternabond tape on roof laps over sealantI'm questioning the sides also because there isn't a good flat surface on the side to apply it. I could go down into the gutter but the smooth plastic surface won't be great for adhesion and it will be tough to get a good press in there. I'm worried it would just peel up after a few years.
GroupsBucket List Trips Bucketlist destinations you just can't miss. Which spots stick with you?Jan 18, 202513,487 PostsFifth Wheel Group Interested in fifth wheels? You've come to the right spot.Mar 07, 202519,008 PostsMotorhome Group Join in here to discuss all things motorhomes.Mar 09, 202538,709 PostsRV Families Activities, advice, and destinations for those traveling with kids!Oct 09, 2024501 PostsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Apr 19, 201944,027 Posts
Bucket List Trips Bucketlist destinations you just can't miss. Which spots stick with you?Jan 18, 202513,487 Posts