All ActivityMost RecentMost LikesSolutionsRe: smartphone as hotspot for remote workThanks for the replies.smartphone as hotspot for remote workI'm about to start a remote job and would like to occasionally camp while doing so. I'll be issued a laptop and will need to perform 2D documentation work of 3D CAD designs. For those of whom are using their smartphone as a hotspot when the CG WiFi isn't adequate, I'd like to know your experiences and recommendations. My phone plan allows only so much data for this purpose each month so I don't want to get stuck being unable to do my job during a trip.Re: Intermittent water leak issueThanks Robert. Totally understand I need to fix the leak. My concern was more of curiosity about why only an intermittent leak....inasmuch as the system is under constant pressure from the city connection. Thanks to everyone for the replies.Re: Intermittent water leak issue drsteve wrote: CampSight wrote: Do you have an idea about why my leak would be on the cold side? Seems odd to me. Because the WH is connected to both sides of the plumbing system, it can pressurize the cold side too. I thought about that but isn’t there a check valve on the cold water intake side of the WH to prevent that? I suppose it could be faulty.Re: Intermittent water leak issueThanks Alfred. I will try relieving the pressure and get back. Do you have an idea about why my leak would be on the cold side? Seems odd to me.Re: Intermittent water leak issueI’m inclined to think the leak is on the cold side of the faucet (the fixture itself) but I don’t understand why it happens only intermittently and not all the time....and why only when the water heater is operating. Does anyone have ideas for this?Intermittent water leak issueThe bathroom cold water faucet leaks underneath whenever I turn on the water heater - in either gas or electric mode. It’s seems to be happening intermittently though. Any help with this would be appreciated.Re: 3000W Chinese Gensets Info.I have noticed some small leakage under my Champion, presumably from loosening caused by vibration. Is it common to have to tighten up bolts as part of the regular maintenance?