Today on our way to the Poconos tried to get into the new CW near Harrisburg, Pa. Very dissapointed, only one small entrance/exit, and if you miss it thate is no place to turn around for several miles. We got in but the lots were so jam packed with...
Got my new recall Michelin's recently and was running 70/75 psi in front/rear, and had the usual sloppy front end wander. It's a 2012 Forrest River Lexington with only 3200 miles. Stock damper was garbage. Installed a Roadmaster Reflex Stabilizer th...
Installed my Progressive Industries Surge Protector today, under the rear bed where power cord is fed into the unit. While there I had a chance to give the wireing and plumbing a good looksee and almost had a heart attack. Now mind you, the overall...
Getting ready to install a Progressive Industries EMSHW30C in my class c. However there's no room under the bed where the wire is located to do a proper install to mount the unit to the floor or bed platform wall.However, have plenty of room in the ...
I have a Jensen 12 volt 32" led tv in my front entertainment center, 2012 Forest River Lexington. Only audio is thru the tv speakers and no way to hook it up to the speakers in the coach that are tied into the cab stereo.Thinking of getting an ampli...
All Armor All will do is make it look shiny for awhile. If you want to treat, preserve, and protect, use 303. I treat my window rubbers, slide out seals, inside and out, every month or so, with 303, and they still look new after 4 years.Grumpy
Never, ever, use silicon on the exterior or your rv. It was never ment for exterior use. It will eventually crack and let water in. Nothing will adhere to it, not even more silicon.When attaching something to the exterior, and it has a flange, use ...
Your probably over tightening them, causing the o-ring to deform.There just supposed to be snugged down, just a bit, after the o-ring makes contact.Have used that type of cap for many years and never had a problem like yours.Grumpy
PatRenee wrote:Seriously SCV... blow it out your @@@@@@.... it's not that I can't get more screws...it is simply the fact that the MFG is to cheap to include enough screws to securely fasten their product to the wall...AT LEAST 4 would have been nice...
