All ActivityMost RecentMost LikesSolutionsRe: mattress replacementWe purchased a regular Queen sleep number bed not the RV version. It was cheaper. Very light weight and is adjustable.Re: Is this considered a truck camper?????Thanks. can you tell me what I did wrong 3 times in a rowIs this considered a truck camper?????Found this in Minnesots on the hwy from Bloomington to Rochester. [img] width=640[/img]Re: 2 inch lift kit??Yes I have changed trucks but not my username.(can we do that?) I now have a 2013 ford cc dually 4X4. Yes it has a factory block on it now. I was wondering about increasing its sizeRe: 2 inch lift kit??How can I post pictures?Re: 2 inch lift kit??9920 lbs. on rear axel Yes I am getting an occasional headlight flash from traffic. Camper is a 2013 Chalet TS116Re: Chalet ts116fbI have a 2013 TS116 with every option including both fold away bunks except for satellite dish. I carry it on a 2013 Ford F350 CC Dually 4x4 6.7 diesel 14K GVWR. I have upper and lower stable loads and it sits a little low in the rear. We like everything about it. We used to have a 2009 Host and when we went to replace it with a new one, we felt the build quality of the Host wasn't as good as our 2009 any more. So after seeing the Chalet we decided to go with it. Much more room than the Host Mammoth, but really heavy. To me I don't take it off road or drive over 65, maybe 70 down hill. The weight police will have me. The truck hauls and stops with it just fine. I can't really tell any difference between the Host and it. I will be adding better sway bars though.Re: 2 inch lift kit??I'll work on posting pics. Here is the link to the system installation http://www.realtruck.com/shared/pdf/manufacturers/185/66-2024-66-2025-installation-instructions.pdf2 inch lift kit??Is anyone using a rear block lift kit on a ford f350 dually? I have upper and lower stable loads and still have a little sag. I was thinking I could put a block lift kit on the rear axel and get the ride height back to level. I realize when unloaded it won't be level again, but it is worth it when loaded.Re: Awning New InstallationThanks for the photos. They showed me what I was looking for. Yes there is a concern about the awning hitting the slide out. I was planning on leaving the roller tube for the awning to rest on. I am also going to have to fabricate a plate to move the swingout jack forward about 4 inches.
GroupsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Jan 19, 202544,029 Posts