We would like to put two AGM batteries inside our truck camper under the dinette seat. My research is giving me mixed messages about venting so I wrote Lifeline and asked them. This is their reply: "They should be vented to the outside. They can safe...
We have just purchased our first truck camper - a used 2007 Lance 845 and have a couple questions that I hope you can help us out with. The camper is still at the dealer and we're considering having a couple modifications done before we pick it up. I...
tomman58 wrote:I normally cut a 1/2 piece of trim to fit and glue it to each end and in the middle (pour has two door)on each location I use a piece of wood that fits insie to glue to then afix it to each end. Our stuff never moves and the cabinet i...
SidecarFlip wrote:What I did (because my TC fits entirely in the bed (no bumper / back step), I went to Lowes and bought 2 lengths of round white PVC pipe, 2 caps and 2 external threaded adapters and threaded caps with 6 flat stand off's. I put one ...
Cabman 850 wrote:Installed the Lagun table mount for the dinette table. What a big difference, wish we would have done this sooner as it creates so much additional room.Do you have photos?
sbryan@vtbryans.com wrote:Many many thanks to Tizi for this great idea. As noted, a tight fit, but now the front wardrobe on our Igloo is a lot more practical. Installed ELFA baskets. Had to assemble them inside the wardrobe because they are a tight ...
I've been wondering the same thing. We just got our truck camper but we previously had a Sportsmobile van. One time we left our favorite chairs out to indicate occupancy and when we got back, the chairs were gone so we won't do that again. This was n...
