I have a Cummins ISB6.7L in Freightliner chassis. Recently started getting a check engine light which became more frequent. Their was also power loss when it was on.The CEL is for "EGR out of calibration" This means not working right since it cannot ...
I just bought a pair of Sumitomo 719front tires (255/70/22.5 M 16ply rated). I asked what to inflate them too and was told they inflate them to 120psi which is the max on the sidewall. I have always used a load and inflation chart specific to that ti...
Our Dometic microwave convection died. It was a DOTRC17B. 2007 vintage. The fuse is good. It's actually an LG. I'd like to get a new LG to fit the mounts but I do not know the models that replace the size and back mount. Has anyone done this? Other ...
We have a National Tropical coach from 2008 that we bought just over a year ago. I was replacing a headlamp pod recently and noticed the low mounted "running/driving/fog lights" and realized that I have never seen them come on. I did check to make su...
We have a 2007 Freightliner XCR chassis and are having a problem with the electrical system. The jacks, rear camera and screen and the dash AC have all stopped working. There may be other things too. They became intermittent for a day the quit all o...
CA Traveler wrote:The inflation tables are designed (hopefully) to provide the optimal conditions for a given weight. More pressure up to the max can cause more tire rounding and less traction and center wear for example. Inflation for all tires on a...
BarryG20 wrote:I must be missing something. Some one posted a load inflation table from Sumitomo tiresThe link is talking about their S tires and in the chart below the load inflation table it has the 719's specifically in that chart. Why would you ...
rk911 wrote:i did a search for 'Sumitomo Tire Inflation Chart' and got several hits.If you scroll down to the bottom you'll find a phone number and physical address for the company.This link includes a tire inflation table. Scroll down a bit to see ...
BB_TX wrote:If the headlight switch rotates to turn the headlights on/off, then it may also pull/push to turn the fog lights on/off.That's it! I never would have thought to pull the knob out. Thanks!
Today I ran all of the tests and checked all of the things that connect to the board and all were good. With a helper I checked that the upper boards were signaling the lower to start the AC mode. I decided to pot in a spare new board just in case th...
