Mcheil83
Explorer
Joined 7 years ago
User Profile
User Widgets
All Activity
Re: Atwood Water heater trouble
Giving everyone an update who was generous to me with giving me suggestions, thank soooo much Old-Biscuit for the 800 number. We gave them the number on our circuit board and they sent us a new board for free without any hesitation. Installed the board around 10 am and has been working perfect. Thank all hopefully I can help someone else out with their question in the future. Matt665Views0likes0CommentsRe: Atwood Water heater trouble
Again thank you everyone for the input. Like I said I will be buying a new circuit board this Monday or Tuesday. How often do they go bad, specially since this one is almost brand new? We’re not full time RVing, we go about we go about 6 to 9 times a year.666Views0likes0CommentsRe: Atwood Water heater trouble
BFL13 I lit the igniter with the lighter let it run for a minute to get the probe igniter hot turned the switch off for 3 seconds then switched it on an did not light I still have zero spark at the probe which is brand new cause that’s what I thought the problem was originally. I installed the grill mod a month ago an that works perfectly. The original water heater would not stay lit long enough to warm up the tank. I guess it’s the board?243Views0likes0CommentsRe: Atwood Water heater trouble
I can smell the propane coming through the tube where you can adjust the flame. I honestly did not try using a lighter I was nervous to do that but now I know I can try I will do that. Once it doesn’t light the 3 times my DSI-FLT light comes on. The hot water heater is also gas only not electric/gas.245Views0likes0CommentsAtwood Water heater trouble
Hopefully someone can help me out with my situation. My camper is a 2016 and we had trouble with our hot water heater ALL last year. It was at the dealer 5 times until they installed a brand new water heater, it worked as it should. We used the camper in June and worked fine and we were not able to camp untill Oct. 19,20,21. Now we have no spark you can smell the gas going through the tube. I put a new igniter in today (with the proper gape) and still no spark. Wiggled some of the wires around and still nothing. There is water in the tank cause I pulled the pressure relief valve and water shot out right away. Read about it might be a control board but it’s brand new. Is there any other test I can run to maybe determine what is might be? Sorry for the long paragraph just wanted to make sure I gave all the details. Thank you everyone in advance MATT2.1KViews0likes23Comments
Groups
