My Atwood 7920-II furnace won't do anything, was working 100% perfect day before failure so something just broke. No fan, no clicking, nothing. Been reading tons of forum tech data relating to problem and watching YouTube. What I've done or verified...
Hi, hope this is right forum for my inquiryWe are landing in Las Vegas January 26 from Alaska for a 12-day RV rental trip, 2019 Thor Four winds 22B. Our Plan is to visit Death Valley, Joshua Tree and the Grand Canyon (Weather permitting) So just won...
Received new control board, installed and fixed problem; than quit working after about 5 cycles.I bought the more expensive replacement on Amazon because it had better reviews but guess I got a bad one.Amazon sending replacement. At least I now the p...
check for power coming into the circuit board at the blue wire of the connector.This I understand, thanks! Yes, power at blue wire thermostat on, no power off.Feeling better about preliminary diagnosis. New controller board should be here Wednesday I...
trailrider wrote:If you have the newer version with the fan relay on the circuit board you need to check for power from the fan terminal to the fan motor when the thermostat is calling for heat. And make sure the thermostat is closing the circuit be...
Thanks for the replies seems that we should probably stay flexible. It's difficult to make campsite reservations in an area not familiarized with so we're just going to play it by ear and hope for the bestMy son's going to be Navigator, he's quite go...
