Found my Equa-Flex was cracked when I was doing wet bolt update.. The reason being because the springs were not aligned with the Equa-Flex cause undue stress. The Pic shows that it doesnt line up, its actually off by more than what the picture shows....
Sometimes we will stay at Flying J because they have RV spots. Other times we have parked where the big trucks park. My question is has anyone ever encountered problems parking back where the big trucks are?
The one tread looks like chunks are coming out. Other tires are wearing ok. Any Ideas on what is causing this tire to wear like this. Possible bad tire or axle.
Got E rated tires installed, 80psi max, Tire guy said it would be better to run around 65-70 psi as tires heat up. Always thought I should run max cold rating 80psi. FW weight is around 9000 lbs hooked up to truck.
I don’t mind driving thru Atlanta have done so numerous times, yes traffic is slow but has been pretty much moving. Its the construction zones, when traffic is really backed up. I have checked several suggested routes on here. Most are shorter but no...
lizzie, looked at that route and it looks pretty good. Is 231 four lane most of the way. Wont be taking fifthwheel so just driving and staying in west memphis overnight then on to Bartlesville,Ok. Long drive to Memphis so sometimes interstate less st...
Iam going to Memphis from Jax,Fl and google maps is showing I75 to I20 as fastest route, takes me right thru Atlanta, changed to taking 285 around Atlanta to I20. We are leaving at 4:30am next Wednesday from Jax that would put me in Atlanta around 9:...
To press in bushings I just went to local auto parts store and they loan tools free, just have to leave a deposit, so you bring it back. Just get the ball joint press.
I had St 235 80R 16E went to BF Goodrich Commercial T/A All-Season 235 85R 16E GVW of FW is 12000. I have looked for a pressure weight table but mostly all I fine is max inflation rate is 80 psi. I have a 2011 crossroads cruiser 305skp
