welsteach
Explorer
Joined 20 years ago
User Profile
User Widgets
All Activity
Re: Install new cab over curtain in a Bigfoot TC, HOW?
This is just in case someone else needs help with this. Grant at Bigfoot replied to my inquiry. He said 3/4” screws in ceiling of 2500 work. I installed a curtain track, a lightweight dark showered curtain (shortened) to keep down weight and voila! It worked splendidly.449Views0likes0CommentsRe: Right truck and camper setup for a northern Alaskan winter
Have camped in Alaska in -20F in our Bigfoot 2500. We were warm but shot through propane like water. Also, -40 is a no flow in the propane. You would need hookups and an electric space heater as well as bottled water for that (so as not to burst pipes in basement that gets no heat without a furnace blowing. It could be sone with a homemade build designed for winter and a mini wood stove.1.3KViews0likes0CommentsFord owner installed trailer camera
There are apparently two models of this. One is camera only and the other is camera with TPMS. Does anyone have either model installed on their Ford. We have a 2018 with sync3. I am wondering whether the tire pressure system is worth the price tag!?!1.5KViews0likes5CommentsRe: Carrying a Honda 2000i inside generator compartment
Thanks folks. Don't want front hitch mount because we use ferries and added length equals added cost. The gen compartment is prepped for an Onan. We need propane for heat (Alaska) so don't want it used for penny. Looks like I am not the only one who had this thought. It's a go!464Views0likes0CommentsCarrying a Honda 2000i inside generator compartment
https://www.amazon.com/MORryde-SP60-041-Sliding-Battery-Tray/dp/B007HRQBRU Thinking about using this tray to put our Honda on. It would make it so that I could pull out the tray, plug in the genny and go. It is a bear for me to carry from backseat to ground (physical disabilities and female upper body combined). Thoughts? Rated for 250#. Was thinking I would put a thin rubber pad on bottom to absorb noise and keep genny from “walking” in the tray. It would pull out from generator compartment and exhaust away from camper, because of orientation in tray. Would need to take care mounting solidly because stress would be on mounts. Anything else I am missing? Oh, mounting in Bigfoot 2500 10.63.4KViews0likes11Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Feb 13, 202538,707 Posts Travel Trailer Group
Prefer to camp in a travel trailer? You're not alone.Feb 06, 202544,025 Posts
