Hi all, I'm back. My dometic 3804 doesn't cool on gas but works fine on ac. I was told the only thing it could be was the chimney. Well, I removed the fridge and the baffle is indeed in there, and the chimney is clear, with very light surface rust. T...
I have a 1990 dometic that works fine on electric, but barely works on gas. A few weeks ago it lasted about a day on gas, now it melts down within a few hours. The cooling unit is spotless, I mean no rust, barely looks like it was ever used. The regu...
I have a 1991 Dometic 3804 fridge that is not cold on gas. It'sfine when plugged in, but after 2 days on gas, the fridge begins to meltdown, then I can plug it back in and it will chill properly again. Now I know its 24 years old, time to replace, ye...
My atwood water heaterwas turned on for about 12 hours without any water in it. I let it cool down for about a day and filled it with water, and turned the electric back on, no hot water. I hit the reset on the back of the heater, still no hot water....
I have a 2002 5er with a 10 gal atwood water heater. It works fine on ac, but about a year ago stopped working on gas. Everything else in the trailer works fine on gas, fridge and stove. It sparks fine and tries to light, but goes into lockout mode a...
I got it!, After pulling the fridge and cleaning the chimney and baffle I'm back in business. I want to thank most of you for all your suggestions. The chimney was not dirty, and no soot at all, just some light scale rust. The baffle was complete and...
It was always cold on ac. I've owned it for about 6 yrs, and it was always hit or miss on lap, over ''this past summer it doesn't work at all on lp, the flame stays lit , but melts down within hours of being unplugged. I have it out now, the chimney ...
Sorry red, my previous thread said it showed about 12 inches. I rarely use the stove so pressure drop isn't an issue in my mind., although the stove and water heater work fine, with no problems. My flame looks nice and strong, and never goes out duri...
No !red,didn't check the btu's at the burner. How would I do that? I will go thru the whole thing again, now that I know the chimney is right.Btw, i checked the lip pressure at the burner, with a borrowed manometer. This isn't rocket science folks, t...
