All ActivityMost RecentMost LikesSolutionsRe: Cool Mods - Thread restored 10/18/2012Thanks again Loopy! You've got a great set up. Loopy wrote: The wall that I have the TV mounted to has a support in it from the factory since that's where the original TV was mounted. The upper half of the wall is one big solid piece of wood. If you don't have this in your trailer you can still find two studs and at worst mount a board on the exterior of the wall from one stud to the other and mount it to that. The TV mount I used actually had all teh screws in one vertical row so even if I hadn't had the support in the wall I could have mounted it directly to one stud. As far as the clock shelf goes, there weren't any studs in that corner that I could attach to so I just used the plastic wall anchors since I knew we wouldn't be putting enormous amounts of weight on it. I used 1" screws with the plastic wall anchors. Re: Cool Mods - Thread restored 10/18/2012Loopy, Fantastic job on the mods. Thank you for sharing. I especially appreciate seeing how the mud dauber screens look, I just ordered them a couple of days ago. One question about the corner shelf and television bracket...how do you fasten to the walls? I'm nervous about drilling into the walls but do have a electronic stud finder, should I use metal screws? if so, how long? Thanks again.
GroupsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Jan 21, 202544,030 Posts