All ActivityMost RecentMost LikesSolutionsRe: power inverter installI should state that in the specifications for the isolator. I found a few informative posts about the installation searching google.Re: power inverter installI am also researching this and I would put a battery isolator that would be wired to truck ignition on 12V. That way it disconnects the camper from the truck batteries when the ignition is off. Can anyone recommend a good 2000W pure sine wave inverter?Re: Reinforcing toilet/shower/black tank comboIf I right click on the word image it gives me the choice to view image.Re: Reinforcing toilet/shower/black tank comboIt looks like this Re: Reinforcing toilet/shower/black tank comboThe toilet mounts to the top of the tank near the front and the drain pipe in at the bottom rear of the tank. I don't think that would work. Thanks,Reinforcing toilet/shower/black tank comboHello, This is my 1st camper and I have learned a lot from this forum so far... thanks! I have a black tank drip from either the threaded pipe going into the tank or possibly the flange on the tank. I pulled the toilet first (need to change the seal) and I noticed that the tank was bolted to the top of the tank with no flange. This method of mounting allows the toilet and tank to flex a lot. I am worried about this cracking the tank. Is there a way to add strength to tank? Thanks, Mike
GroupsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Jan 20, 202544,030 Posts