All ActivityMost RecentMost LikesSolutionsOld B&W 5th wheel hitch and new GMCI have a standard B&W patriot 18k 5th wheel hitch and just bought a new GMC with the factory gooseneck 5vr prep installed. Has anyone convertered their old hitch or found a means of using the old style hitch with their new setup? Appreciate any input..Re: GlowStep RevolutionAwaiting our set this week or next, looking forward to trying them out..Re: Carpet to wood floor replacement buc1980 wrote: I did mine 3 years ago with very good results. What type of flooring did you use, that looks really nice...Re: Carpet to wood floor replacement alboy wrote: Replaced all the carpet, except slideouts with AC 4 commercial rated 12mm laminate.You will have to glue the joints to keep it together,left a 1/4 gap and floated the floor, Still looks great after 5000 miles,absolutely love it. So there were no issues with the slide outs clearing the flooring? Any scratches from the slide dragging across the floor? Thanks for the info..Re: Carpet to wood floor replacementI was thinking a laminate would be thin enough to have the slide ride over..Re: Repair/replace cargo door (tailgate hole) cannesdo wrote: Frame's in good shape. All of it looks new aside from about 5 square inches. :/ I think the rivets could be drilled out and the frame cut but don't know how glued in the panel is. My best option is probably finding on in a salvage yard. I've thought of doing this also but going a step further and using it to completely cover the front area where the door is, I think it would help with stones and other road debris..Carpet to wood floor replacementI've done some searching but can't really find anything on this. Has anyone done this and what did it take and how do you like it? My wife and I have been considering pulling up the carpet and replacing it with some sort of wood product, looking for ideas, thoughts, process and the like. Thank you in advance for your input.Re: Computer update after TransferFlow install on a Chevy 3500HDUpdate.. I had the tank installed and when the installer transferred the pump/float for the fuel level, they must have banged it pretty good so that when I still had about 30 gallons left, the light was coming on and the gauge was on E. My buddy has a Ford and they were able to tell the computer to calculate based upon the new size (51 gallons vice what ever was in there before) but I've not been able to get anyone on the Chevy side to figure out where that is and how to adjust it. I have since gotten the fuel float replaced and the gauge is pretty accurate now but I would never recommend the place that did my tank install to do anything on my truck or RV again.Re: Interior ceiling light lens removalPull on the lens? or pull the light out of the ceiling?Interior ceiling light lens removalI have a 2013 Sandpiper and can't seem to figure out how to get the covers/lenses off the flat recessed ceiling lights. I can pull it down a bit and try to turn the glass while holding the base but it just spins. Is there something I'm missing? Thanks,
GroupsFifth Wheel Group Interested in fifth wheels? You've come to the right spot.Feb 28, 202519,007 PostsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Mar 01, 202544,026 Posts