kdk
Explorer
Joined 17 years ago
User Profile
User Widgets
All Activity
Re: Taaadaaa! Took the plunge. Airbags on the Class A
If those titainium bits are not of a good grade bit, go to Lowes and purchase a good quality high speed bit. I got some bits from harbor freight that were supposedly titainium that would hardly drill a hole in wood. Having worked in machine building for over 20 years of experience a 1/2 " hole in mild steel with a good bit shouldn't take more than 5 minutes. If you have a Industrial tool supply huose would be a goodplace to get one or maybe two, but again drill a pilot hole first.540Views0likes0CommentsRe: New Wiper Blades
My MH had the large "J" hook on the arm, blades were $45 bucks each. These blades with the large frames would lift off the glass in high winds. So I went to the junk yard and got some arms off a ford pickup. Cut the last 3" off these and the MH arms. Welded the smaller "J" hook to the larger arm. Now I buy frame less blades for $10 at wally world.292Views0likes0CommentsRe: Onan 8000 Generator
Had a similar problem ans eventually found a corroded connector if I remember correctly 5 or 6 pin above the axle on the right side of the generator. I sliced around it and all is good. This start and stop circuit works a little different as the switches do not provide power the the gen start circuit or stop but instead provide a ground for relays. Hope this helps; Keith143Views0likes0Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Feb 13, 202538,707 Posts
