All ActivityMost RecentMost LikesSolutionsRe: What 5r (ToyHauler) do you own?Traded our 08 Fuzion 302 in on a new Grand Design Momentum 351 with full body paint. Night and day difference in build quality.Re: Batteries - Diesel TrucksTo the OP... I too have a 15 Ram with close to the same mileage. We had a few cold days here in S. LA and it was enough to do them in. I replaced both with AGM batteries from O'Reilly to the tune of $400. They gave no warning at all that they were getting weak. I went out one morning and , CLICK!Re: New Vs UsedAlways money to save buying used. The key is to find one someone kept under an RV port when not in use. I just bought new because I couldn't find the one I wanted used. I tried like hell tho. It drove my wife nuts. Have fun with it.Re: How to lift each tire off the ground for service?I jack under the U-bolt on the axle. If I can't get under the U-bolt, I'll use wood next to the U-bolt to spread out the contact patch.Re: Auto slide hitch w/ B&W turnover?boshog - I'll watch for that, but was assured by Anderson Hitch that it's not enough of a change to unload the front. We'll see. The 9" difference is not all in the mounting point to the truck. 5" at the truck and 4" in the king pin block. Cummins12V98 - my existing hitch is a Colibert Free Ride and has no rearward adjustability.Re: Auto slide hitch w/ B&W turnover?Just to update this...I went with the Anderson Ultimate. Haven't towed with it yet tho. Thanks to all who assisted.Re: Auto slide hitch w/ B&W turnover?Never thought about a longer pin box. That'll keep me from having a hitch laying around unused.Re: Auto slide hitch w/ B&W turnover?looking into that now. Thanks for the input. Also looking into Anderson Ultimate. With it's 9" offset to the rear, that will clear me cab corner.Auto slide hitch w/ B&W turnover?I'm in need of a lil assist. I currently tow with a Ram Megacab short bed and I dented my pass rear cab corner. My Toy Hauler is an 08 Fuzion. I've been searching for a auto slide that'll work with my B&W. I've seen a few sliders that you have to get out to operate that will work and a few that ARE auto but, don't work with my B&W. Pro's and con's of each? Thanks for the help. ToddRe: Which hitch to choose?I have the Colibert Free Ride. It's the receiver type that fits into my B&W turnover hitch. It's got a ring that comes up when locked and locks the jaws closed. It's got great articulation also. Plenty of options out there, take a look around and get what ya like best.
GroupsFifth Wheel Group Interested in fifth wheels? You've come to the right spot.Jan 29, 202519,006 PostsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Jan 20, 202544,030 Posts