All ActivityMost RecentMost LikesSolutionsRe: Puck system & hitch questionsJust get an adapter for the puck system and use existing hitch.Re: Small gas tank beefJust got a new 2021 Ram 3500 with a 50 gallon tank!!!Ram 3500 DRW TiresHas anyone replaced the factory 235/80R17 with 255/80R17? It looks like they are 1.2" taller and .7" wider. If so do you have plenty of space between the rear wheels?Re: Too hotNo, was there last July.Re: Auto level question Moomba2002 wrote: I use the hitch height I think it is called and it will bring up the rear jacks and then set the height for the hitch, curious why yours won't lift the jacks. X2!! I just hit the hitch height button, then walk to the truck.Re: All steel 236/85/R16 LRF rhagfo wrote: buck n duck wrote: rhagfo wrote: buck n duck wrote: OP here......Wow.....I should have checked back sooner. I will add a little bit of information here. Yes my 5'r came with load range "D" tires. Factory rims and tires are 6 lug wheels rated at 80psi and ST225/75R15 tires. My trailer currently rides out of level pretty bad. It is about 6" difference from front to back. I recently had a blowout on my rear tire and had to purchase a tire on the trip. I am going to be upgrading to a 16'' wheel and tire to gain height. If I go with the 235/85R16 I will gain around 1.75' of height. I have found wheels that will fit my trailer and are rated for 110psi. Did the tire blowout from too much weight being on the rear tires? Yes I am quite sure of it. Does a load range "E" tire add up to cover the max weight of my trailer? Yes it does. But why not go higher? I had no intentions of going to a load range "G" tire as some are suggesting, but......I am not against it. I really would like an all steel tire but I have not been able to find one in that size at load range "F". Also in my consideration is price. Why not buy an all steel higher load range tire for the same price as a Goodyear Endurance load range "E" tire. I am not a full timer but a frequent weekend warrior. You guys are way smarter at this than me and most of you have thousands and thousands miles more than me pulling a trailer. That is why I am here asking questions. Maybe I don't know what I am talking about or overthinking it. I am reading everyone's reply and have read almost every thread I could find on tires and heck...……..I still cant decide what to do. Thanks!!! :S Why not fix what I see as the root cause get your trailer as close to level as possible. Then worry about tires, I am sure you are putting a lot of extra weight on that rear axle. The equalizer can only compensate for so much out of level. Did you read my post before you commented????? I AM fixing part of the issue of being out of level by adding 16” rims and taller tires. After mounting the tires I will re-evaluate and see if a subframe is needed. I saw that tires will only gain you half the difference in diameter of the two tires, I have posted several time a method and math to calculate how much you need To raise the trailer at the tires, but I am on my. phone and it is time to walk the dog, maybe later when the computer is out. A subframe still may be needed. But........there can’t be any harm in going to a 16” rim and taller tire as long as it fits. Way more options for tires in 16” rim. If I go the 235/85R16 it will be roughly 1.75” taller than what I have right now. I drove on 2” blocks this past weekend and it changed from 6” difference to 2.5” difference.Re: All steel 236/85/R16 LRF rhagfo wrote: buck n duck wrote: OP here......Wow.....I should have checked back sooner. I will add a little bit of information here. Yes my 5'r came with load range "D" tires. Factory rims and tires are 6 lug wheels rated at 80psi and ST225/75R15 tires. My trailer currently rides out of level pretty bad. It is about 6" difference from front to back. I recently had a blowout on my rear tire and had to purchase a tire on the trip. I am going to be upgrading to a 16'' wheel and tire to gain height. If I go with the 235/85R16 I will gain around 1.75' of height. I have found wheels that will fit my trailer and are rated for 110psi. Did the tire blowout from too much weight being on the rear tires? Yes I am quite sure of it. Does a load range "E" tire add up to cover the max weight of my trailer? Yes it does. But why not go higher? I had no intentions of going to a load range "G" tire as some are suggesting, but......I am not against it. I really would like an all steel tire but I have not been able to find one in that size at load range "F". Also in my consideration is price. Why not buy an all steel higher load range tire for the same price as a Goodyear Endurance load range "E" tire. I am not a full timer but a frequent weekend warrior. You guys are way smarter at this than me and most of you have thousands and thousands miles more than me pulling a trailer. That is why I am here asking questions. Maybe I don't know what I am talking about or overthinking it. I am reading everyone's reply and have read almost every thread I could find on tires and heck...……..I still cant decide what to do. Thanks!!! :S Why not fix what I see as the root cause get your trailer as close to level as possible. Then worry about tires, I am sure you are putting a lot of extra weight on that rear axle. The equalizer can only compensate for so much out of level. Did you read my post before you commented????? I AM fixing part of the issue of being out of level by adding 16” rims and taller tires. After mounting the tires I will re-evaluate and see if a subframe is needed.Re: All steel 236/85/R16 LRF goducks10 wrote: Have you thought about adding a sub-frame under your 5er to increase height? 6" is a lot to be out of level. Seems like you'll still get some premature wear even with G or F's. I have and still might do it. I drove my trailer on 2" blocks and it went from 6" difference to 2.5" difference. So I am going to get the tires and rims and then see how it looks/measures out.Re: All steel 236/85/R16 LRFOP here......Wow.....I should have checked back sooner. I will add a little bit of information here. Yes my 5'r came with load range "D" tires. Factory rims and tires are 6 lug wheels rated at 80psi and ST225/75R15 tires. My trailer currently rides out of level pretty bad. It is about 6" difference from front to back. I recently had a blowout on my rear tire and had to purchase a tire on the trip. I am going to be upgrading to a 16'' wheel and tire to gain height. If I go with the 235/85R16 I will gain around 1.75' of height. I have found wheels that will fit my trailer and are rated for 110psi. Did the tire blowout from too much weight being on the rear tires? Yes I am quite sure of it. Does a load range "E" tire add up to cover the max weight of my trailer? Yes it does. But why not go higher? I had no intentions of going to a load range "G" tire as some are suggesting, but......I am not against it. I really would like an all steel tire but I have not been able to find one in that size at load range "F". Also in my consideration is price. Why not buy an all steel higher load range tire for the same price as a Goodyear Endurance load range "E" tire. I am not a full timer but a frequent weekend warrior. You guys are way smarter at this than me and most of you have thousands and thousands miles more than me pulling a trailer. That is why I am here asking questions. Maybe I don't know what I am talking about or overthinking it. I am reading everyone's reply and have read almost every thread I could find on tires and heck...……..I still cant decide what to do. Thanks!!!All steel 236/85/R16 LRFLooking for an all steel construction load range F tire in 235/85R16. Looks like Sailun and Hercules are LR G. My trailer is only 12,000 GVWR.
GroupsFifth Wheel Group Interested in fifth wheels? You've come to the right spot.Jan 13, 202519,006 PostsMotorhome Group Join in here to discuss all things motorhomes.Jan 14, 202538,705 PostsTravel Trailer Group Prefer to camp in a travel trailer? You're not alone.Jan 13, 202544,029 Posts