burrko
Explorer
Joined 17 years ago
User Profile
User Widgets
All Activity
Re: King Jack Antenna Problems
I think I failed to clearly explain that, while they used coaxial connectors, the wire between the connectors is just a single conductor, 26-gauge stranded wire that is connected to the center conductor of the coax connectors. It has very little strength to resist twisting and breaking. In using coaxial cable, the outer shield (I would use the heavier coax with the woven wire shield) would not be used as a conductor. It would only serve for strengthing the cable. Hope this helps explain. Thanks!.276Views0likes0CommentsKing Jack Antenna Problems
Our MH came with a King Jack HD antenna. When coming and going in our neighborhood I would hear an occasional "ratcheting" sound. This past week while camping I found out what caused the noise. Our TV reception went out because the tree branches in the neighborhood had twisted the King Jack antenna around until the 26 gauge wire connected to the antenna head broke. I purchased a new cable from King for $12 but I am seriously considering using a regular coaxial cable instead of this 26 gauge cable from King. The coax connections would be the same and I would have the strength of the coax which is much stronger than a 26 gauge wire. I think, if proper slack is maintained for turning the head, it would work fine. Anyone out there with experience with this problem? Thanks2.2KViews0likes4CommentsRe: 2000 Dodge Cummins with 3.55 gears
I have a 2005 Dodge with a diesel with 3.73 gears and pull about 12K loaded 5er. When we have been out west in the Rockies we have been down around 20 mph when climbing 6% grades. I see several posts on this post where people are saying they have no problem doing 55 - 65 mph up the mountains. What am I doing wrong?434Views0likes0Comments
Groups
Fifth Wheel Group
Interested in fifth wheels? You've come to the right spot.Jan 13, 202519,006 Posts
