140 PSI Water Pressure

Geo*Boy wrote:
Go to rvwaterfilterstore.com and purchase a Watts made in the USA, lead free with stainless parts water pressure regulator, set it to 40 PSI and protect your RV and still have great flow.

Fill fresh water tank and use on board pump......

Simple...

Matt_Colie wrote:

Edd505 wrote:
Who sets water pressure that high, never seen it. Did you gauge the pressure your self with a reliable gauge.

Edd,

Nobody "sets" a water pressure that high. It is a result of the local terrain as city water system. The storage tank is up a mountain somewhere because the land was cheap and it was a convenient place to locate it. The city has to pump the water up there to make it available.

Nobody with any sense is going to pay money to pump the water mains to that pressure. If it does get pumped to that pressure, someone should be replaced.

Matt

This.

We camped once in a campground on the side of a mountain in West Virginia. The camp well was on top of the mountain and our site was downhill about 500 feet vertically. I didn’t have a gauge to measure it but I did have a pressure regulator so no worries. I did hook up a hose to the spigot and with no nozzle, shot a full-hose stream of water easily 50 feet. Thirty feet of drop translates to fifteen psi, do your own math. (Yes, there were surely camp regulators between levels in the campground, but obviously not enough of them.)

Edd505 wrote:
Who sets water pressure that high, never seen it. Did you gauge the pressure your self with a reliable gauge.

Used a Watts water pressure gauge. The meter I'm using reads within 5% of a calibrated unit (used by our city water dept.).

I was shocked when I saw the 140 psi reading. I've visited a number of RV parks with water pressure around 70-80 psi (still high enough to damage some RV's), but never one with pressure this high.

Go to rvwaterfilterstore.com and purchase a Watts made in the USA, lead free with stainless parts water pressure regulator, set it to 40 PSI and protect your RV and still have great flow.

Edd505 wrote:
Who sets water pressure that high, never seen it. Did you gauge the pressure your self with a reliable gauge.

Edd,

Nobody "sets" a water pressure that high. It is a result of the local terrain as city water system. The storage tank is up a mountain somewhere because the land was cheap and it was a convenient place to locate it. The city has to pump the water up there to make it available.

Nobody with any sense is going to pay money to pump the water mains to that pressure. If it does get pumped to that pressure, someone should be replaced.

Matt

Edd505 wrote:
Who sets water pressure that high, never seen it. Did you gauge the pressure your self with a reliable gauge.

When we FTd we came across HIGH water pressure at SEVERAL CGs across the USA

Who sets water pressure that high, never seen it. Did you gauge the pressure your self with a reliable gauge.

Howdy!

I ran into a problem with high water pressure ina park we had stayed at a couple of years ago. I have a good Watts water pressure regulator that I can set the pressure myself no problem. What I failed to consider was the connection to my black tank flush as I use a Sewer Solution and it caused a leak. I now have a inline water pressure reduced connected to that line also. Just something to think about.

“Happy Trails”
Chiefneon

The plumbing in my TT is officially rated for only 80 psi. It says so both in the owner's manual that came with it and on a sticker inside. So I always use a water pressure regulator set to 50 psi.

Once stayed at a campground where we were informed at check in that a water pressure regulator was required to hook up because the city insisted on supplying the campground at 150 psi.

Only use CG water supply to fill my fresh water tank
Use fresh water tank/pump exclusively....consistent pressure/flow, no water pressure reg required and fip of switch pump is off at bedtime/when leaving RV

Simple........