Ivylog wrote:
A Gen-turi is for your neighbor so they do not eat your exhaust. Hopefully the rig to your right will have one too as you will be parked like sardines. I carry a metal 90 degree sweep (picture in my link/post above) that I have loaned to a inconsiderate neighbor that is blowing their exhaust towards me when parked close together. I also have a sweep that I put on my AquaHot to turn it's exhaust upwards and away from my neighbor. One that size (2"ID) is harder to find.
I did find ......this one on Ebay. Doubt a PVC one would not melt but for a couple $ worth a try.
FWIW -
don't waste your time w/ PVC.....PVC will absolutely melt - i even tried to DIY my own GenTuri and couldn't do it, every bit of PVC i tried melted, no matter how large the air gap.
Electrical conduit (bent pipe) with a union works for the exhaust tip connection but again a PVC stack will melt.
pictures of my failed attempt -
