JoeH wrote:
Very cool, we had one spill not to long ago ... now I have a question. I do not have a 3d printer and see many for sale on craigslist for pretty reasonable prices.... anything I should look out for, either positive of negative ?
I have several at work, and a couple at home. Not long ago, $2500 got you a decent printer. Now for a fraction of that, you can get a BETTER printer!
Two of the most popular ones are the Creality CR-10S filament type printer, and the Elegoo Mars resin type printer. I own both, each have their pros/cons.
For general use, it's really hard to beat the CR-10S. It can make things up to roughly 12"x12"x16". Runs about $459 new with warranty.
https://amzn.to/2nYjs64The Elegoo Mars resin printer is ideal for smaller projects, and is currently $289.
https://amzn.to/2mpqoskThe build volume is much smaller, but can make much more detailed items. I wouldn't recommend this as a "general use" type 3D printer. But if you get into craft/hobby type projects, this one really shines. I'm making scale items for my RC hobby.
Here are a few things I've designed for RV:
Magnetic Utility HatchTactical Flashlight Wall MountRV 12V Outlet Receptacle HousingEngel Fridge Digital Temperature ControllerThere are many forums, Facebook groups, YouTube videos, etc., all dedicated to these printers.
"I" wouldn't buy a used one. A new one comes with a warranty, and support from the manufacturer. I'm experienced enough at this point to troubleshoot/repair/rebuild 3D printers, but I have several years experience using these, and work as an aerospace eng tech. Getting a used one from a questionable source, without some background knowledge, can lead to a lot of frustration!
If you have any specific questions, please feel free to PM me, or contact me at robert@2manytoyz.com
