A different fluorescent to LED conversion
I had a 12v fluorescent light over the bathroom mirror. It was blue and too dim. I decided to convert it to LED. Here is the original light. I decided to use LED strips instead of the usual ...
Forum Discussion
Here is how it looks now with the ends frosted by sanding the inside of the lens. First with the light off.
And with the light on.
The wife seems happy with the little dots and the wires no longer show. I never did measure the current. If the locks aren't frozen I'll do it later today.
As far as brightness, it is plenty bright for the small bathroom. Most of the LED panels I have used are the 36-1210 LEDs and are about the same brightness as the 1141 bulbs they replaced. This has 45-1210 LEDs.
And with the light on.
The wife seems happy with the little dots and the wires no longer show. I never did measure the current. If the locks aren't frozen I'll do it later today.
As far as brightness, it is plenty bright for the small bathroom. Most of the LED panels I have used are the 36-1210 LEDs and are about the same brightness as the 1141 bulbs they replaced. This has 45-1210 LEDs.
