Adding 12V Receptacles
I would like to add some 12v receptacles and first thought I would have to run wire (still not a bad idea and I will come back to that), but it was suggested that I could tap into a nearby 12v light f...
Forum Discussion
Johno02 wrote:
I have a dedicated 12v outlet added to the base of the bed just for my CPAP. Only problem is that if AC power goes off during the night, the CPAP still runs fine, and I don't wake up.
And this is my first priority! This may be the easiest part and I probably asked too much in my original post. I think I can do this part just by tapping into the reading light wiring which is good because my bed is in a slide out so by using existing wiring, I won't have to deal with routing and protecting moving wires.
The DC outlet by the dinette/LR sofa would be for a 12v fan or USB charging so light wiring should be okay for that also. That just leaves the entertainment inverter to puzzle through.
