Anyone replaced the vinyl flooring?
I have a question regarding the replacement of vinyl flooring. Do you glue it down or just staple the edges? I ask because most RV's have their vinyl flooring placed on the subfloor before the wall...
Forum Discussion
1) Remove original floor covering (vinyl or carpet)
2) Treat surface so that it is absolutely flat (this may require some filler and sanding)
3) Rough cut new vinyl to fit space leaving 2" extra at perimeter
4) Spread adhesive on floor covering 1/2 of space at a time
5) Form joint along walls and door openings pressing with stair tool (a relief cut in corners may be necessary)
6) Trim vinyl to space with utility knife, discarding excess 2"
2) Treat surface so that it is absolutely flat (this may require some filler and sanding)
3) Rough cut new vinyl to fit space leaving 2" extra at perimeter
4) Spread adhesive on floor covering 1/2 of space at a time
5) Form joint along walls and door openings pressing with stair tool (a relief cut in corners may be necessary)
6) Trim vinyl to space with utility knife, discarding excess 2"
