Converting to LED lights to the outside of your rig

austinjenna wrote:

I did every one of my marker lights last winter. Simple to do. Just pull off the lens, pull out old bulb, insert new bulb, and replace the lens. Here is what I used for the marker lights. They are short enough to fit under the lens cover and the price was right (20 for $7.49 and free shipping). I also replace all the ceiling lights in the trailer with these.

So I started looking at the paddle type 921 replacements again that you posted to. Those show a lumen output of 415, a normal 921 bulb is about 250, but every other paddle type one I come across are only 100 lumen output, see clicky

They all look the same, they both use 24 SMD LED's so I dont know how one can say the output is 415 when all the others say 100 (if they say it at all). I am sure there is really one factory churning these things out so I am hesitant on getting them.

I don't know about the lumens but they are just as bright or brighter than the incandescent bulbs they replaced. They are about the same color temp. I just put them in while we were in Florida this winter so don't know how long they will last. So far I am 100% pleased with them.
Barney