Fence post under trailer question
I was thinking about doing the fence post sewer hose mod with the slide-out gutter. I currently keep the sewer hose and attachments in a tote in the outside storage. I don't like the idea of using the...
Forum Discussion
I made spacers and attached a square vinyl fence post on top of the existing metal sewer bumper tube. One end has a cap screwed on, and the opening end cap is held in place with two small rods going through the cap and tube vertically. I put the cap on the tube and just drilled matching holes for the rods to go through. The "rods" are actually heavy metal coat hangers with a loop on top. Three trailers, and it's still working well. I never lost a rod...Most fence posts have some holes in them for fencing so I mounted those on the lower side to allow drainage.
