Front TV
I want to modify the front TV cabinet in my Bounder. The previous owner put in an LED TV but left the cabinet original depth. I would like to remove about 4" off depth. Thoughts or advice appreciated.
Forum Discussion
You've already got the same answer I'd give as an amateur cabinetmaker. Cut it down from the back. It's the only way to save all the trim, make sure doors still fit, etc.
Even then - it's not easy to do. Trimming the same amount of wood off all sides of a box can be a challenge. Be careful, many cheap cabinets are particle board which doesn't take a shear force well, the back panel itself lends some structural intergrity.
Even then - it's not easy to do. Trimming the same amount of wood off all sides of a box can be a challenge. Be careful, many cheap cabinets are particle board which doesn't take a shear force well, the back panel itself lends some structural intergrity.
