Forum Discussion
enblethen
Mar 30, 2017Nomad
Transfer switch if equipped would be where shore power and generator wiring(factory) would come together normally around the 120 power distribution panel.
I am guessing that there is wire ran to tongue area to feed factory genset location.
If you are using shore power cord directly to genset, then you are ready to go!
I am guessing that there is wire ran to tongue area to feed factory genset location.
If you are using shore power cord directly to genset, then you are ready to go!
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Dec 11, 2017