Gutters!

LarryJM wrote:

Dave-Sparky wrote:

LarryJM wrote:


You can see how I solved the awning issue along with how I installed it on the entire back end of my trailer where there was no insert molding to put it in.

Larry

Tried your link in your signature and the system said it was not available.

Dave

Photobucket was down most of yesterday for maintenance and is up now so links in my sig should be working now.

For the awning part what you need is to divert the water from the ends of the rolled up awning away from the sides of the trailer to prevent the black streaks.

Larry

Yep, pictures are back. I see what you did for the ends of the roller, I am not sure that I have enough room for that, but I will check into it
Dave

Dave-Sparky wrote:

LarryJM wrote:


You can see how I solved the awning issue along with how I installed it on the entire back end of my trailer where there was no insert molding to put it in.

Larry

Tried your link in your signature and the system said it was not available.

Dave

Photobucket was down most of yesterday for maintenance and is up now so links in my sig should be working now.

For the awning part what you need is to divert the water from the ends of the rolled up awning away from the sides of the trailer to prevent the black streaks.

Larry

LarryJM wrote:


You can see how I solved the awning issue along with how I installed it on the entire back end of my trailer where there was no insert molding to put it in.

Larry

Tried your link in your signature and the system said it was not available.

Dave

Dave-Sparky wrote:
I have installed the raincap product noted a couple of posts above. On the non door side it has done a good job getting the runoff to drip about 2 inches from the side of the trailer, thus no runs on that side.

However, on the awning and door side it would not fit as the awning is mounted to close to the gutter to allow it space to hang down at the needed angle.

Unit is in storage, or I would add a photo

You can see how I solved the awning issue along with how I installed it on the entire back end of my trailer where there was no insert molding to put it in.

Larry

BarneyS wrote:
A product that will do the job like no other is the RainKap. It is a bit expensive but will eliminate the black streaks and is easy to install. It replaces the vinyl insert in the screw cover molding along the top of the roof.

If I remember correctly, member LarryJM installed it on his rig some time ago. You might want to send him a PM and ask about it.
Barney

Yep I think I was one of the first and this has hands down been THE BEST mod I have done. Not only does it eliminate 99.9% of any black streaks, IMO it helps eliminate any leaks from any thing like windows/door/fittings that are under it since the water no longer runs down the sides for the most part. You can see more info in the link in my signature along with some actual pics of how it works when it rains.

Larry

This guy did similar.

PVC rain gutters video

A few random thoughts...

If rain is heavy enough to swamp the gutters, I don't think black streaks will result from that. The residue from the roof will be very diluted and the flooding water will carry it away. Steaks result from water slowly dripping down the sides. But, It Never Rains in Southern California, so what do I know???

I think adding 2" gutters might be excessively large. Maybe 1 1/2", or even 1" pipe would be quite larger than normal RV gutters.

Interested in seeing your results, because you may be quite the craftsman. In my minds eye, I don't see how it is not going to look pretty cr@appy. But willing to give you the benefit of the doubt until the photos are posted.

The clip-on downspouts for RV's have worked very well for us, to reduced the black streaks.

Be careful ripping PVC pipe. I have done it. And I was very surprised with how much stress there was in the pipe. I have had it pop open as it was sawed, but worse than that I have had it clamp down on my table saw blade. And you won't know what it is going to do until you're in the middle of a cut. Be prepared with wedges to insert in the kerf as you go.

if you have a manual awning use the "pull down stick" for the awning to keep the gutter clear. we can use the stick and walk around the trailer (except slide area) and clean out before a storm rolls in. Also use the extension or a clothes pin to keep the water away from the trailer!

I have installed the raincap product noted a couple of posts above. On the non door side it has done a good job getting the runoff to drip about 2 inches from the side of the trailer, thus no runs on that side.

However, on the awning and door side it would not fit as the awning is mounted to close to the gutter to allow it space to hang down at the needed angle.

Unit is in storage, or I would add a photo

I put extensions on mine to get the water away from the sides. I haven't had any problem with this set up, it helps keep the black streaks off the sides.