how to make a12 volt switch lit in off postion
on my main switch panel by the door i have a ceiling light switch that i would like to be lit in off position , so when you enter the trailer at night you can easly find the switch. thanks
Forum Discussion
Use a DTSP switch lighted or non-lighted (If non-lighted, add a small pilot light) use the N.O. (normally open) contacts to switch the light, and the N.C. contacts to switch the pilot light or illumination of the switch.
Other option is to put a 12VDC accessory relay in parallel with the switch and use the NC contacts on the relay to switch the lighting...
I will post a diagram if interested....
Other option is to put a 12VDC accessory relay in parallel with the switch and use the NC contacts on the relay to switch the lighting...
I will post a diagram if interested....
