how to make a12 volt switch lit in off postion
on my main switch panel by the door i have a ceiling light switch that i would like to be lit in off position , so when you enter the trailer at night you can easly find the switch. thanks
Forum Discussion
Go to Radioshack and buy a 12 volt LED indicator:
LED indicator
Install this near the switch and wire it directly across the switch terminals. LEDs are polarity sensitive, so if it does not light, reverse the wires. This only draws 15 milliamps (0.015 amps).
LED indicator
Install this near the switch and wire it directly across the switch terminals. LEDs are polarity sensitive, so if it does not light, reverse the wires. This only draws 15 milliamps (0.015 amps).
