Installing a MorRyde Equalizer
Getting ready to install a CRE3000 setup with wet bolts and shackles. My thought is the bolts should have the hole that provides grease facing down..............right? Thanks
Forum Discussion
gdweb wrote:
grease hole should be at either the 3 or 9 o'clock position.
from morryde pdf:
the grease zerk
may be installed to the inside or to the outside, this
is done at customer preference. Note the grease
exit hole location on the bolt, this should face
sideways to allow for ease of grease flow
Thanks! I recall one person really cursing a lot when he couldn't get grease in it no matter how he jacked the trailer up and moved shackles and springs. Anyone ever sliced a narrow slot down the length of the bolt where the hole is to spread the grease?
