Installing Inteli-Power 4600
My original inverter is a Magnitek 6300 Q series. Im installing an Inteli-Power 45 watt converter. The wiring colors don't exactly match up, and I'm not going to be installing the new DC board at th...
Forum Discussion
Pulled the Magnatek manual. Looks like the blue is umfiltered converter output, and red is charger output.
I can run a jumper from the black wire in the new converter to where the blue wire attaches. I can run the green wire to the AC side and put it in a ground slot.
http://www.hayseed.net/~jpk5lad/RV%20Information/MagnaTek%20Pwr%20Converter/RV%20Binder1.pdf
I can run a jumper from the black wire in the new converter to where the blue wire attaches. I can run the green wire to the AC side and put it in a ground slot.
http://www.hayseed.net/~jpk5lad/RV%20Information/MagnaTek%20Pwr%20Converter/RV%20Binder1.pdf
