Inverter installed
I put a KISAE SW1210 Pure Sine Wave, 1000 watt inverter in our Wolf Creek 850 Truck camper. It's mounted to a piece of 3/4 inch MDF that's over-layed with a piece of powder coated grey sheet metal (s...
Forum Discussion
Carb Cleaner wrote:No, brother, I was serious, compliment intended. Those terminal covers are a thing most folks would not even consider and are a step above, IMO. You also shrink wrapped other cable ends and that's also a good thing.
Unless it was sarcasm, in which case it's hilarious
About the inverter orientation: I've wondered about this myself and the only thing I can assume is that it has to do is with thermal considerations. Fans and heatsinks are located for maximum dispersion of heat and the engineers are free to CYA about the orientation. If you're not operating at 100% output, I wouldn't worry.
