Forum Discussion
grimmrlg
Jul 07, 2015Explorer
Sorry to take so long to get these picture posted but here they are. Starting with a view in the storage bay of the two jacks sticking up though the floor. I modified each jack for relay control so they could be run by a remote control.

Here is the bottom view, I welded up the right-angle brackets of 1/4" steel and bolted to the frame, the hole and 3 mounting bolts are the same as a trailer tongue to accept the jack bolted from the topside.


Inside by the power converter I mounted the remote control (white box) that runs the 2 relays on each jack. The 4 channel remote control is the small brown fob.

To prevent accidental lowering while traveling, I added a disable switch by the inside the convert door (on the right side)

Let me know if you need any additional details.
Rick

Here is the bottom view, I welded up the right-angle brackets of 1/4" steel and bolted to the frame, the hole and 3 mounting bolts are the same as a trailer tongue to accept the jack bolted from the topside.


Inside by the power converter I mounted the remote control (white box) that runs the 2 relays on each jack. The 4 channel remote control is the small brown fob.

To prevent accidental lowering while traveling, I added a disable switch by the inside the convert door (on the right side)

Let me know if you need any additional details.
Rick
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,395 PostsLatest Activity: Oct 12, 2025