Magnetek Series 6300A Model 6345 Bad?
I recently purchased a 1994 Empire 34 foot travel trailer that had a water leak and am gutting it to convert my cargo hauler to a camper. I was looking for some information on the inverter (Magnete...
Forum Discussion
zhoenixx wrote:tenbear wrote:
The wire size for most things is based on the size of the fuse. If your fuses are 15A, use AWG 14 wire. Standard colors are red (+12v) and black (-12v), or, Black (+12v) and white (-12v). Mine uses the black and white.
The wire between the battery and the converter may need to be changed for a larger size. The Magnetek would only charge at about 5-6 amps. the PD 4645 is capable of charging at 45 amps. If the wire between them is long, 15' or so, you might consider replacing the old #6 or #8, with #4 to allow more of the 14.4v in boost mode to get to the battery.
Thank you very much for all the info - this forum is great!
Should I use stranded or solid wire?
Is there any reason why I shouldn't get the larger, 55?Amp?PD4655V since I am running all new wiring anyways?
And any specific power outlets and switches, or just standard household components from Home Depot?
Thanks!
Use stranded wire for the 12v wiring. If you are running new wire for 120v use the standard Romex.
If you have any thoughts about adding batteries, go with the larger converter. I replaced my Parallax 7345 with a PD 9260. The batteries will take whatever current they want up to the limit of the converter. There is no advantage to a larger converter if you are using only one battery.
I have used standard components for both 120vac and 12vdc applications. I have seen people caution against using 120v switches for 12v use but I have used them with no problems.
