Manual stabilizer jacks with a drill
I had an extra cordless drill laying around here and thought I'd put it in the TT. I also took the bit out of my socket set thinking I could just use that to move the stabilizer jacks. I soon realized...
Forum Discussion
I've got the Camco adapter and it works fine with my 18v Dewalt, but just be certain that the stabilizers are all the way up when you are done raising them with the drill. One time my battery was not well charged, I used the drill to raise the stabilizers and didn't look carefully. The front right was still a ways down and I wacked it off when coming out of a driveway. I now double check with the manual crank.
