Manual stabilizer jacks with a drill
I had an extra cordless drill laying around here and thought I'd put it in the TT. I also took the bit out of my socket set thinking I could just use that to move the stabilizer jacks. I soon realized...
Forum Discussion
BobsYourUncle wrote:
Only challenge with the lube on the threads is that it attracts dirt. I don't lube mine for that reason, even though it would help a lot, until they get covered with dirt. Then they would be harder to turn.
If I have to I put a little oil on the nut part of the jack, but not the threaded rod.
Not a problem if you use dry silicone lube.
