Manual stabilizer jacks with a drill
I had an extra cordless drill laying around here and thought I'd put it in the TT. I also took the bit out of my socket set thinking I could just use that to move the stabilizer jacks. I soon realized...
Forum Discussion
owenssailor wrote:Playtime II wrote:I agree. I have my drill set to ratchet before it will twist my wrist. That is why I do need to go around later and snug the stabilizers with the hand wrench.
Use a drill with a clutch. running the jacks up to a sudden stop will hurt your wrists or worse, bend something.
It took a few minutes of experimentation but I found a setting on the clutch in my drill where the jack is snug at the same point where the clutch just starts to "ratchet".
No wrist twist.
