New 50 AMP plug install-tin leads?
My rig has a hardwired 50 amp cord that is way too long. So I am shortening it by cutting it and adding a new CAMCO plug like this: This one The instructions say not to solder the ends but it se...
Forum Discussion
I have made several cords with this exact plug. I cut the coating off per length required and twist clockwise the stranded wires that have been just exposed.
Not rocket science and there is NOTHING else a person can or should do other than be sure each screw is nice and TIGHT.
Not rocket science and there is NOTHING else a person can or should do other than be sure each screw is nice and TIGHT.
