New to me camper, missing door.
I bought a vintage camper the other day at an auction, its missing its door. The lower part is there, the top is gone. The opening is 24.5" x 40.5". The lower door is made with 1" square steel tubing ...
Forum Discussion
Francesca Knowles wrote:
Do you have any concerns about overloading the frame/axle?
Seems like there's been a lot of weight added to what may have started life as a pretty light unit.
Not really, with the 15" wheels and heavier springs it seems fine, the weight on it now isn't even beginning to compress the springs.
Its most likely lighter now then it was as a camper. No sink, tanks, potty, or other furniture inside, just the added weight of a few sheets of plywood and a much better suited tongue.
I built the tongue today, I used a Fulton 50 degree coupler and some 4" C channel. It'll add a lot of strength to the frame and make towing it a lot safer.
