Patio light hangers for electric awnings
I have a dometic electric awning on my rv. I have been toying with the idea of making a rod of some type to hang our patio lights from rather than hooking them to the valance of the awning. Occasion...
Forum Discussion
dannytas wrote:
This is how I did mine
First I replaced the bolt on each of the arms with an eye bolt with a jam nut. Between the two eye bolts I used picture hanging wire connected to a snap connector and turnbuckle on each end. I tried rope/twine but it stretched too much.
I think this might work....Thanks for posting this....
After tightening the turnbuckle, not too tight, I'm able to hang the lights. I'm able to retract the awning without removing the lights.
