Pex tubing.
We have a washer hook up in our fifth-wheel. We will never use it. I would like to cut and cap the pex tubing that goes to the washer hook up. That way I do not have winterize the hook up or de win...
Forum Discussion
Corkey05 wrote:Chris Bryant wrote:I agree with Chris, this is the best method.
Best way would be remove the “T” that feeds the hookup and replace with a straight coupling.
Another consideration is to install a simple cutoff valve at the "T" so restoring the system would be easy. The next owner or even yourself might be appreciative of having the plumbing in place when they next need it.
This is the winning solution. Simply remove the "T" and insert the same type valve you have in the low point drains. That will keep water and antifreeze out of the washer line, but allow it to be functional again with the turn of a valve.
