Boy, you sure are intent on making this much more difficult than it really is! [emoticon] Drill a hole in the cargo compartment floor, run a cable down through the floor from one of the inverter outputs to the outside world, seal it with caulking, and you're done. With the inverter located in the front pass through you'll have to also run cables down through the floor and out to the battery anyway, what's the problem also running the inverter output to the outside world as well? [emoticon]
??? Did you read my post with the material I listed below?
Yes drill hole in floor in pass through and run carflex whip as I posted to a proper tt outlet with weather cover...
How am I making it harder?