Re-threading Accordion Blinds
I have accordion style window blinds in my 2022 Jayco Jay Flight trailer. The thread broke so I have taken it down to re-thread it. I hope someone here has done this before. This blind has four strings that attach to 2 springs at the top. I see at the bottom the threads cross. The 2 left threads go out the right side and vice versa. Both spring threads were broke at the top so I'm not sure how they go at the top. Do the inner threads join on one spring and the outer threads join on the other or is it overlapping with threads 1 and 3 joining on one spring and threads 2 and 4 joining on the other?
I have a bonus question. My blind and outer cover attach to the ceiling with about 7 screws. 4 are are little longer than the other 3 screws. I lost track of which holes are for the longer screws. Does anybody know? If not I may try long/short/long/short. There's not a lot of difference, but 4 are a little longer.
Nobody replied. I got it done. It wore me out holding the valence in place putting it back up. You can close or delete this thread. Over and out.
probably no one has done it haha. why don't you tell us how you did it so there is a reference if some one else has to do it.
