Relocating fresh water tank
I liked the layout of the Rialta, but the prices are ridiculous and repairs and parts are out of hand. The final straw for me was someone on a trip needed a transmission rebuilt, the transmission was...
Forum Discussion
Thanks for the response, I would love to be doing this on a TT, on a Toyota motorhome there is no room and it may not be successful!
My plan is to weld angle iron down pieces to the frame and then 1/2 inch plywood under tank with angle iron running the length of tank and bolted to the down pieces. I will bolt in case of a need to remove tank.
Will try to remember to post pictures. JIm
My plan is to weld angle iron down pieces to the frame and then 1/2 inch plywood under tank with angle iron running the length of tank and bolted to the down pieces. I will bolt in case of a need to remove tank.
Will try to remember to post pictures. JIm
